Membrane pump DOZATRON-C
In Stock
438 $
ACON DOZATRON pumps are membrane electromagnetic pumps for dosing with a microprocessor.
The membranes of these pumps are made from rigid PTFE and have high chemical and physical durability.
All pumps are IP56 rated.
DOSING:
On the pump's front panel, there is a switch for regulating performance (30%/100%) and for forcibly disabling the pump.
The control of impulses (from 1 to 120 imp/min) is done by a potentiometer on the pump's front panel.
External control of the pump is carried out by supplying and removing 220V from the pump.
The ability to connect a chemical level sensor in the canister. The chemical level sensor prevents water shortage in the dosing line, which excludes crystallization of chlorine. The pump stops at the right time, watching the level of chemistry in the canister (Acon ACON entry nodes are included in the package).
Electrical parameters
Power supply voltage
220В ± 10%
Maximum power consumption
20 Wt
Power frequency
50 Hz
Protection class against electric shock
Class II
Dosing
Dosing pump type
Membrane
Suction and pressure tube material
SOFT PVC
Suction and pressure tube size
4 х 6 mm
Maximum suction tube length of the metering pump
2 m
Maximum dispense pump discharge tube length
3 m
Maximum capacity of diaphragm metering pumps, at 1.5 bar back pressure
10 l/h
Operating back pressure for diaphragm metering pumps
1.5 bar
Maximum back pressure for diaphragm metering pumps
8 bar
Pool volume
Minimum pool volume
1 m3
Minimum pool volume
1000 m3