In Stock

451 $

A water control and level regulation control panel for the floating pool.
It comes with 5 water level sensors, which are used to monitor the level of the pool. 
The control panel controls an electromagnetic solenoid valve with a load of up to 0.22 kW 220 V. 
The programmed averaging time of 16 seconds allows you to use the system under different types of water level fluctuations (protection against waves).
When the critical level is reached, there is the possibility of connecting a notification device or a drain pump with a load of up to 0.44 kW 220 V. There is also a signal output that can be connected to a system for filtering control to block the operation of filter installation pumps.  
You can directly connect the control panel to a filter installation pump with a "dry run" protection of up to 2.2 kW 220 V. At critical levels, the control panel blocks the operation of the filter installation pump. 


Package contents  AQUACONTROL M 150

  1. AQUACONTROL M 150 control panel
  2. Water level sensor in the case - 5pcs;
  3. Set of fasteners:
    1. Die 6*40 - 4 pcs;
    2. Screw 4.0*35 - 4 pcs;
  4. Instruction - 1pc;
  5. Warranty label - 1pc;

Electrical parameters

Power supply voltage

220В ± 10%

Power frequency


Protection class against electric shock

Class I

Maximum power consumption, not including connected load

15 Wt

Maximum load current for connection of the overflow actuator

2А (0,4kW)

Protection class


Dimensions and weight

Dimensions of the control panel

210 х 157 х 70 mm

Weight of the control panel

0.3 kg


Ambient air temperature

+5÷35 С˚

Ambient air humidity



Maximum load current for each filter unit pump

10А (2,2kW)

Number of filtration pumps to be connected

1 units

Water refill

Maximum load current for connection of the water refilling actuator

2А (0,4kW)

Number of sensors in the set

5 units

Connection type of level sensors


Averaging duration

16 sec