0
0
AQUACONTROL M100
AQUACONTROL M100

AQUACONTROL M100

In Stock

379 $

Pool control and water level regulation for either a floating or scummering swimming pool with water supply control.

For operation with 2, 3, or 4 electrode level sensors or a dipstick sensor
Three operation modes: 
«DRAINAGE» – The operation mode with 3 underwater level sensors. It is designed to drain water from the tank, well, wellhead, and protect the pump from operating in «dry run» mode
«MAGISTRAL» – The operation mode with 2 underwater level sensors or a dipstick sensor. It is designed to fill water in a scummering swimming pool or to protect the water supply pump from operating in «dry run» mode
«FILLING» – The operation mode with 3 or 4 level sensors. It is designed to control the level in the accumulator tank. There is the possibility of connecting an emergency alarm or drain pump, in case of overflow of the accumulator tank (operation mode with 4 sensors)

 

Kit contents AQUACONTROL M 100

  1. Control panel AQUACONTROL M 100 - 1pc;
  2. Level sensor in the body - 3pc;
  3. Set of fasteners - 1pc:
    1. Screw 6*40 - 4pc;
    2. Screw 4.0*35 - 4pc;
  4. Instruction - 1pc;
  5. Warranty label - 1pc;

Electrical parameters

Power supply voltage

220В ± 10%

Power frequency

50Hz

Protection class against electric shock

Class I

Maximum power consumption, not including connected load

15 Wt

Maximum load current for connection of the overflow actuator

2А (0,4kW)

Number of operation modes

3 units

Protection class

IP56

Dimensions and weight

Dimensions of the control panel

210 х 157 х 70 mm

Weight of the control panel

0.3 kg

Environment

Ambient air temperature

+5÷35 С˚

Ambient air humidity

0.75

Water refill

Maximum load current for connection of the water refilling actuator

2А (0,4kW)

Number of sensors in the set

3pc (Conductometric)

Connection type of level sensors

Conductometric (3-4pc), Dipstick (Gerkonov)

Averaging duration

16 sec

Authorization