AQUACONTROL M150
In Stock
447 $
A water control and level regulation control panel for the floating pool.
It comes with 5 water level sensors, which are used to monitor the level of the pool.
The control panel controls an electromagnetic solenoid valve with a load of up to 0.22 kW 220 V.
The programmed averaging time of 16 seconds allows you to use the system under different types of water level fluctuations (protection against waves).
When the critical level is reached, there is the possibility of connecting a notification device or a drain pump with a load of up to 0.44 kW 220 V. There is also a signal output that can be connected to a system for filtering control to block the operation of filter installation pumps.
You can directly connect the control panel to a filter installation pump with a "dry run" protection of up to 2.2 kW 220 V. At critical levels, the control panel blocks the operation of the filter installation pump.
Package contents AQUACONTROL M 150
- AQUACONTROL M 150 control panel
- Water level sensor in the case - 5pcs;
- Set of fasteners:
- Die 6*40 - 4 pcs;
- Screw 4.0*35 - 4 pcs;
- Instruction - 1pc;
- Warranty label - 1pc;
Electrical parameters
Power supply voltage
220В ± 10%
Power frequency
50Hz
Protection class against electric shock
Class I
Maximum power consumption, not including connected load
15 Wt
Maximum load current for connection of the overflow actuator
2А (0,4kW)
Protection class
IP56
Dimensions and weight
Dimensions of the control panel
210 х 157 х 70 mm
Weight of the control panel
0.3 kg
Environment
Ambient air temperature
+5÷35 С˚
Ambient air humidity
0.75
Filtration
Maximum load current for each filter unit pump
10А (2,2kW)
Number of filtration pumps to be connected
1 units
Water refill
Maximum load current for connection of the water refilling actuator
2А (0,4kW)
Number of sensors in the set
5 units
Connection type of level sensors
Conductometric
Averaging duration
16 sec