AQUACONTROL M100
In Stock
376 $
Pool control and water level regulation for either a floating or scummering swimming pool with water supply control.
For operation with 2, 3, or 4 electrode level sensors or a dipstick sensor
Three operation modes:
«DRAINAGE» – The operation mode with 3 underwater level sensors. It is designed to drain water from the tank, well, wellhead, and protect the pump from operating in «dry run» mode
«MAGISTRAL» – The operation mode with 2 underwater level sensors or a dipstick sensor. It is designed to fill water in a scummering swimming pool or to protect the water supply pump from operating in «dry run» mode
«FILLING» – The operation mode with 3 or 4 level sensors. It is designed to control the level in the accumulator tank. There is the possibility of connecting an emergency alarm or drain pump, in case of overflow of the accumulator tank (operation mode with 4 sensors)
Kit contents AQUACONTROL M 100
- Control panel AQUACONTROL M 100 - 1pc;
- Level sensor in the body - 3pc;
- Set of fasteners - 1pc:
- Screw 6*40 - 4pc;
- Screw 4.0*35 - 4pc;
- Instruction - 1pc;
- Warranty label - 1pc;
Electrical parameters
Power supply voltage
220В ± 10%
Power frequency
50Hz
Protection class against electric shock
Class I
Maximum power consumption, not including connected load
15 Wt
Maximum load current for connection of the overflow actuator
2А (0,4kW)
Number of operation modes
3 units
Protection class
IP56
Dimensions and weight
Dimensions of the control panel
210 х 157 х 70 mm
Weight of the control panel
0.3 kg
Environment
Ambient air temperature
+5÷35 С˚
Ambient air humidity
0.75
Water refill
Maximum load current for connection of the water refilling actuator
2А (0,4kW)
Number of sensors in the set
3pc (Conductometric)
Connection type of level sensors
Conductometric (3-4pc), Dipstick (Gerkonov)
Averaging duration
16 sec