SilverPRO LIGHT SPL 5.1

A comprehensive silver and mercury ionization system for non-chlorine disinfection of private swimming pools up to a volume of 50 cubic meters.

FUNCTIONS:

• Non-chlorine disinfection with silver and mercury ions;
• Automatic reverse flush;
• Water filtration control;
• Pool heating control;
• Water level control in the scumming pool;
• Built-in remote access via Bluetooth and Wi-Fi;
• pH level control and maintenance.

IONIZATION:

The number of silver and mercury ions produced by the system is initially selected in an optimal ratio, so that when the required concentration of one ion is reached, the concentration of the other is also kept within the norm. This makes it unnecessary to monitor the concentration of mercury ions in the pool water without the need for additional analysis of the concentration of silver ions.

The station calculates the duration of the ionization according to a special program.

AUTOMATIC 6-POSITION REVERSE FLUSH:

The block is installed in place of the handle on the 6-position sand filter valve and automatically switches positions according to the schedule and flush settings.

In the station settings, parameters for the duration of the flush, compression, depressurization, and pause are set.

Weekly schedule with the possibility to set up to two flushes a day.

Selection of the pump operation mode during the flush.

The maximum pressure limit at which a forced reverse flush is made (pressure sensor is purchased separately).

The presence of a control for additional reverse flush of the AUTOCLEAN S-Light filter.

FILTRATION CONTROL:

The filtration pumps can be started and stopped with a power of up to 2.2 kW, 220 V, each.

WATER LEVEL CONTROL:

When connected to two submersible, conductometric or plunging level sensors, the station maintains the desired water level in the swimming pool by controlling the electromagnetic clamp (sensors are purchased separately).

Wide range of settings:

• Regulation of averaging: from 1 to 60 seconds;
• Regulation of the duration of the dose: from 1 to 90 minutes;
• Duration of the pause between doses: from 1 to 10 hours.

Allows using the system with different types of water level oscillations (waves).

Adaptation of the dose for slow-performing wells and shafts.

AUTOMATIC REVERSE FLUSH CONTROL:

The station controls the reverse flush of the AUTOCLEAN S-Light filter, fully automating this process.

In the station settings, parameters for the duration of the flush, compression, depressurization, and pause are set.

Weekly schedule with the possibility to set up to two flushes a day.

Selection of the pump operation mode during the flush.

The maximum pressure limit at which a forced reverse flush is made (pressure sensor is purchased separately).

pH LEVEL CONTROL AND MAINTENANCE:

High-precision algorithm for pH corrector dosing.

One galvanically separated input allows significantly to increase the accuracy of measuring pH and, consequently, the subsequent dosing control.

One silencio peristaltic pump with a performance of 2.2 L/h (optional 1.5 L/h).

The ability to connect an unlimited number of duplicate dosing pumps with a performance of up to 2.2 L/h.

Built-in overdose protection - a regulated setting for the maximum allowable volume of daily dosing of chemical preparations required to achieve the desired concentration in the pool water. When the upper limit of the specified volume is reached, the station stops the dosing process until the current days are completed. This protection prevents overdose in case of a failure of the measuring device.

The connection of a chemical level sensor in the canister is possible. The level sensor prevents water from backflowing into the dosing line, which prevents crystallization of chlorine. The pump stops at the right time to monitor the chemical level in the canister (Acon collection node).