SilverPRO LIGHT SPL 3.2

A comprehensive silver and mercury ionization system for non-chlorine disinfection of private swimming pools up to a volume of 100 cubic meters.

FUNCTIONS:

• Non-chlorine disinfection with silver and mercury ions;
• Water filtration control;
• Pool heating control;
• Water level control in the scumming pool;
• Automatic reverse flush control;
• Built-in remote access via Bluetooth and Wi-Fi;
• pH level control and maintenance (optional).

IONIZATION:

The number of silver and mercury ions produced by the system is initially selected in an optimal ratio, so that when the required concentration of one ion is reached, the concentration of the other is also kept within the norm. This makes it unnecessary to monitor the concentration of mercury ions in the pool water without the need for additional analysis of the concentration of silver ions.

The station calculates the duration of the ionization according to a special program.

FILTRATION CONTROL:

The filtration pump can be started and stopped with a power of up to 2.2 kW, 220 V.

In the settings, four load modes are set:

• Small - 3 hours of operation, 5 hours of pause;
• Medium - 5 hours of operation, 3 hours of pause;
• Large - 7 hours of operation, 1 hour of pause;
• Public - 24-hour operation mode.

The automatic setting of the current consumption of the filtration pump, is done using the pump calibration in the control panel menu.

Built-in overload and 'dry run' protection for the current consumption of pumps guarantee long-lasting and reliable operation of pumps.

The station has 3 timeout settings for the pump restart in case of an emergency situation.

HEATING CONTROL:

Using a temperature sensor (supplied with the product), the temperature of the swimming pool water is measured and, if necessary, the heat exchange devices (circulating pump for heating, electromagnetic clamp or electromagnetic contactor for heating element) are turned on or off.

WATER LEVEL CONTROL:

When connected to two submersible, conductometric or plunging level sensors, the station maintains the desired water level in the swimming pool by controlling the electromagnetic clamp (sensors are purchased separately).

Wide range of settings:

• Regulation of averaging: from 1 to 60 seconds;
• Regulation of the duration of the dose: from 1 to 90 minutes;
• Duration of the pause between doses: from 1 to 10 hours.

Allows using the system with different types of water level oscillations (waves).

Adaptation of the dose for slow-performing wells and shafts.

AUTOMATIC REVERSE FLUSH CONTROL:

The station controls the reverse flush of the AUTOCLEAN S-Light filter, fully automating this process.

In the station settings, parameters for the duration of the flush, compression, depressurization, and pause are set.

Weekly schedule with the possibility to set up to two flushes a day.

Selection of the pump operation mode during the flush.

The maximum pressure limit at which a forced reverse flush is made (pressure sensor is purchased separately).

pH LEVEL CONTROL AND MAINTENANCE (OPTIONAL):

High-precision algorithm for pH corrector dosing.

One galvanically separated input allows significantly to increase the accuracy of measuring pH and, consequently, the subsequent pH dosing control.

One silencio peristaltic pump with a performance of 2.2 L/h (optional 1.5 L/h).

The ability to connect an unlimited number of duplicate dosing pumps with a performance of up to 2.2 L/h.

Built-in overdose protection - a regulated setting for the maximum allowable volume of daily dosing of chemical preparations required to achieve the desired concentration in the pool water. When the upper limit of the specified volume is reached, the station stops the dosing process until the current days are completed. This protection prevents overdose in case of a failure of the measuring device.

The connection of a chemical level sensor in the canister is possible. The level sensor prevents water from backflowing into the dosing line, which prevents crystallization of chlorine. The pump stops at the right time to monitor the chemical level in the canister (Acon collection node).

Interface:

A matrix display with an intuitive interface in both Russian and English languages. 6 control buttons allow for easy navigation through the station's menu.

Built-in Wi-Fi and Bluetooth modules. Remote control is performed through mobile applications ACON WEB CONTROL and ACON Bluetooth CONTROL.

Access to the application is divided into 3 levels:

• Work. User section with the ability to monitor values and changes, the range of which is set in the service section. The ability to change the pool's load mode is also present.
• Settings. Service section for maintenance personnel with the ability to track statistics and change filtration, reverse flush, and dose modes.
• Service. Service section with the ability to change all station functions via Bluetooth. Some functionality in the WEB version is unavailable because some settings require physical presence at the object.

By default, passwords are set for the settings and service sections. This level of division allows access according to the competence of the employee or user.

E-mail notifications. The station itself forms a message and sends it to the specified in the settings email addresses. This feature allows for immediate reaction to problems in the swimming pool, giving the possibility to prevent potentially dangerous situations before they become critical. In the settings, you can specify up to 3 email addresses to which emails will be sent.

RS-485 interface for connecting to "Smart home" systems.

MK 002-4 SilverPRO LIGHT SPL 3.2 PACKAGE CONTAINS:

• SilverPRO LIGHT SPL 3 control panel - 1pc;
• Electrode block in set MAXI Cu11 - 1pc;
• Electrode block in set COMBI MINI Ag1 (1Ag/4Cu) (Ag in the center) - 1pc;
• Temperature sensor 0-50°C M12×1.5 - 1pc;
• Pooltester colormetric test set Cu/pH (0.1-4.0mg/l and 6.8-8.2 pH units) - 1pc;
• Clarity tablet (blister with 2up.for 100 gr.=for 5 tablet for 20 gr)) - 1pc;
• PVC-PVC wire 3×0.75 - 1pc;
• Fastener set - 1pc:
• Screw 6*40 - 4pc;
• Saw 4.0*35 - 4pc.
• Instruction - 1pc;
• Warranty label - 1pc.