0
0
SilverPRO LIGHT SPL 1
SilverPRO LIGHT SPL 1
SilverPRO LIGHT SPL 1
SilverPRO LIGHT SPL 1
SilverPRO LIGHT SPL 1
SilverPRO LIGHT SPL 1

SilverPRO LIGHT SPL 1

In Stock

3 103 $

A comprehensive silver and mercury ionization system for non-chlorine disinfection of private swimming pools and pool parties up to a volume of 25 cubic meters.

FUNCTIONS:

  • Non-chlorine disinfection with silver and mercury ions;
  • Water filtration control;
  • Pool heating control;
  • pH level control and maintenance (optional).

IONIZATION:

The number of silver and mercury ions produced by the system is initially selected in an optimal ratio, so that when the required concentration of one ion is reached, the concentration of the other is also kept within the norm. This makes it unnecessary to monitor the concentration of mercury ions in the pool water without the need for additional analysis of the concentration of silver ions.

The station calculates the duration of the ionization according to a special program.

FILTRATION CONTROL:

The filtration pump can be started and stopped with a power of up to 0.5 kW, 220 V.

HEATING CONTROL:

Using a temperature sensor (supplied with the product), the temperature of the swimming pool water is measured and, if necessary, the heat exchange devices (circulating pump for heating, electromagnetic clamp or electromagnetic contactor for heating element) are turned on or off.

pH LEVEL CONTROL AND MAINTENANCE (OPTIONAL):

High-precision algorithm for pH corrector dosing.

One galvanically separated input allows significantly to increase the accuracy of measuring pH and, consequently, the subsequent pH dosing control.

One silencio peristaltic pump with a performance of 2.2 L/h (optional 1.5 L/h).

The ability to connect an unlimited number of duplicate dosing pumps with a performance of up to 2.2 L/h.

Built-in overdose protection - a regulated setting for the maximum allowable volume of daily dosing of chemical preparations required to achieve the desired concentration in the pool water. When the upper limit of the specified volume is reached, the station stops the dosing process until the current days are completed. This protection prevents overdose in case of a failure of the measuring device.

INTERFACE:

A two-line display with intuitive interface in Russian language allows you to set up the station's operation as easily as possible.

By default, passwords are set for the settings and service sections. This level of division allows access according to the competence of the employee or user.

Accumulation of statistics on emergency and control parameters.

MK 002-4 SilverPRO LIGHT SPL 1 PACKAGE CONTAINS:

  • SilverPRO LIGHT SPL 1 control panel - 1pc;
  • Electrode block in set COMBI MINI Ag1 (1Ag/4Cu) (Ag on the side) - 1pc;
  • Temperature sensor 0-50°C M12×1.5 - 1pc;
  • Pooltester colormetric test set Cu/pH (0.1-4.0mg/l and 6.8-8.2 pH units) - 1pc;
  • Clarity tablet (blister with 2up.for 100 gr.=for 5 tablet for 20 gr)) - 1pc;
  • PVC-PVC wire 3×0.75 - 1pc;
  • Fastener set - 1pc:
    • Screw 6*40 - 4pc;
    • Saw 4.0*35 - 4pc.
  • Instruction - 1pc;
  • Warranty label - 1pc.

Electrical parameters

Power supply voltage

220V ± 10%

Power frequency

50Hz

Protection class against electric shock

Class I

Maximum power consumption, not including connected load

20 W

Number of silver plates "MINI Ag"

1 units

Protection class

IP56

Dimensions and weight

Dimensions of the control panel

210 х 157 х 70 mm

Weight of the control panel

0.4 kg

Weight of the MINI electrode unit

1,6 kg

Measurement

Hydrogen pH measurement range

0,0 – 9,9 units

Water temperature measuring range

0 – 52 С°

Pool volume

Minimum pool volume

1 m3

Maximum pool volume (private)

25 m3

Environment

Ambient air temperature

+5÷35 С˚

Ambient air humidity

0.75

Filtration

Maximum load current for each filter unit pump

2.3 A (0.5kW)

Number of filtration pumps to be connected

1 units

Heating

Maximum load current for connection of heating actuators

0.5 A (0.11kW)

Ionization

Number of KOMBI MINI Ag/Cu electrode blocks

1 units

Подсоединение блока электродов

ВР 2"

Number of copper plates "MINI Cu"

4 units

Maximum pressure in the electrode blocks

2 bar

Minimum stabilized ionization current Cu/Ag

0,1 А

Maximum stabilized Cu/Ag ionization current

0,6 А

Authorization