SilverPRO LIGHT SPL 5.1
In Stock
5 995 $
A comprehensive silver and mercury ionization system for non-chlorine disinfection of private swimming pools up to a volume of 50 cubic meters.
FUNCTIONS:
- Non-chlorine disinfection with silver and mercury ions;
- Automatic reverse flush;
- Water filtration control;
- Pool heating control;
- Water level control in the scumming pool;
- Built-in remote access via Bluetooth and Wi-Fi;
- pH level control and maintenance.
IONIZATION:
The number of silver and mercury ions produced by the system is initially selected in an optimal ratio, so that when the required concentration of one ion is reached, the concentration of the other is also kept within the norm. This makes it unnecessary to monitor the concentration of mercury ions in the pool water without the need for additional analysis of the concentration of silver ions.
The station calculates the duration of the ionization according to a special program.
AUTOMATIC 6-POSITION REVERSE FLUSH:
The block is installed in place of the handle on the 6-position sand filter valve and automatically switches positions according to the schedule and flush settings.
In the station settings, parameters for the duration of the flush, compression, depressurization, and pause are set.
Weekly schedule with the possibility to set up to two flushes a day.
Selection of the pump operation mode during the flush.
The maximum pressure limit at which a forced reverse flush is made (pressure sensor is purchased separately).
The presence of a control for additional reverse flush of the AUTOCLEAN S-Light filter.
FILTRATION CONTROL:
The filtration pumps can be started and stopped with a power of up to 2.2 kW, 220 V, each.
WATER LEVEL CONTROL:
When connected to two submersible, conductometric or plunging level sensors, the station maintains the desired water level in the swimming pool by controlling the electromagnetic clamp (sensors are purchased separately).
Wide range of settings:
- Regulation of averaging: from 1 to 60 seconds;
- Regulation of the duration of the dose: from 1 to 90 minutes;
- Duration of the pause between doses: from 1 to 10 hours.
Allows using the system with different types of water level oscillations (waves).
Adaptation of the dose for slow-performing wells and shafts.
AUTOMATIC REVERSE FLUSH CONTROL:
The station controls the reverse flush of the AUTOCLEAN S-Light filter, fully automating this process.
In the station settings, parameters for the duration of the flush, compression, depressurization, and pause are set.
Weekly schedule with the possibility to set up to two flushes a day.
Selection of the pump operation mode during the flush.
The maximum pressure limit at which a forced reverse flush is made (pressure sensor is purchased separately).
pH LEVEL CONTROL AND MAINTENANCE:
High-precision algorithm for pH corrector dosing.
One galvanically separated input allows significantly to increase the accuracy of measuring pH and, consequently, the subsequent dosing control.
One silencio peristaltic pump with a performance of 2.2 L/h (optional 1.5 L/h).
The ability to connect an unlimited number of duplicate dosing pumps with a performance of up to 2.2 L/h.
Built-in overdose protection - a regulated setting for the maximum allowable volume of daily dosing of chemical preparations required to achieve the desired concentration in the pool water. When the upper limit of the specified volume is reached, the station stops the dosing process until the current days are completed. This protection prevents overdose in case of a failure of the measuring device.
The connection of a chemical level sensor in the canister is possible. The level sensor prevents water from backflowing into the dosing line, which prevents crystallization of chlorine. The pump stops at the right time to monitor the chemical level in the canister (Acon collection node).
Interface:
A matrix display with an intuitive interface in both Russian and English languages. 6 control buttons allow for easy navigation through the station's menu.
Built-in Wi-Fi and Bluetooth modules. Remote control is performed through mobile applications ACON WEB CONTROL and ACON Bluetooth CONTROL.
Access to the application is divided into 3 levels:
- Work. User section with the ability to monitor values and changes, the range of which is set in the service section. The ability to change the pool's load mode is also present.
- Settings. Service section for maintenance personnel with the ability to track statistics and change filtration, reverse flush, and dose modes.
- Service. Service section with the ability to change all station functions via Bluetooth. Some functionality in the WEB version is unavailable because some settings require physical presence at the object.
- By default, passwords are set for the settings and service sections. This level of division allows access according to the competence of the employee or user.
- E-mail notifications. The station itself forms a message and sends it to the specified in the settings email addresses. This feature allows for immediate reaction to problems in the swimming pool, giving the possibility to prevent potentially dangerous situations before they become critical. In the settings, you can specify up to 3 email addresses to which emails will be sent.
- RS-485 interface for connecting to "Smart home" systems.
PACKAGE CONTAINS MK 002-4 SilverPRO LIGHT SPL 5.1
- SilverPRO LIGHT SPL 5 control panel - 1pc;
- Peristaltic pump ACON PRM-2 2.2 L/h - 1pc;
- Electrode block in set MINI Cu5 - 1pc;
- Electrode block in set COMBI MINI Ag1 (1Ag/4Cu) (Ag side) - 1pc;
- Set for the dosing pump (suction and delivery with valves) ACON - 1pc:
- Soft PVC tube 4×6mm (2m) - 2pc;
- Injection nozzle elongated 1/2"NPR ACON - 1pc;
- Chemical agent drain valve 1/2"NPR ACON - 1pc.
- pH sensor Ø12mm with 2m cable - 1pc;
- Set of buffer calibration solutions - 1pc:
- pH 7 - 1pc;
- pH 9 - 1pc.
- Soft PVC tube 10×14 mm (5m) - 1pc;
- Sample collection cell with 1 latch (temperature sensor, 1 electrode holder, 2 clamps) - 1pc;
- Sealant adhesive PVC 1/2"WR-D50/63 - 3pc;
- PVC ball valve 1/2"WR-1/2"NP - 2pc;
- Clamp 1/2" NPR-tube D14mm - 2pc;
- Pooltester Cu/pH test set (0.1-4.0mg/l and 6.8-8.2 pH units) - 1pc;
- AUTOCLEAN 1 1/2"-2" adapter set - 1pc;
- Clarity tablet (blister with 2up.for 100 gr.=for 5 tablet for 20 gr)) - 1pc;
- PVC-PVC wire 3×0,75 - 1pc;
- Fastener set - 1pc:
- Screw 6*40 - 5pc;
- Drill 4.0*35 - 2pc;
- Drill 4.0*70 - 3pc.
- Instruction - 1pc;
- Warranty label - 1pc.
Electrical parameters
Power supply voltage
220V ± 10%
Power frequency
50Hz
Protection class against electric shock
Class I
Maximum power consumption, not including connected load
30 W
Number of "MINI Cu" electrode blocks
1 units
Number of silver plates "MINI Ag"
1 units
Backwash cycle time
1 – 10 min
Protection class
IP56
Dimensions and weight
Dimensions of the control panel
190 х 275 х 140 mm
Weight of the control panel
2 kg
Weight of the MINI electrode unit
1,6 kg
Dosing
Number of metering pumps
1 units
Dosing pump type
Peristaltic
Maximum capacity of the peristaltic metering pump, at a back pressure of 0.7 bar
1.5 and 2.2 l/h
Maximum back pressure for peristaltic metering pump
1,3 bar
Peristaltic metering pump tube material
Santoprene
Suction and pressure tube material
SOFT PVC
Suction and pressure tube size
4 х 6 mm
Maximum suction tube length of the metering pump
2 m
Maximum dispense pump discharge tube length
2 m
Maximum pumped liquid temperature
+40 С°
Operating back pressure for peristaltic metering pumps
0,7 bar
Measurement
Maximum pressure in the sample cell
2 bar
Hydrogen pH measurement range
0,0 – 9,9 units
Water temperature measuring range
0 – 52 С°
Flow tube material
SOFT PVC
Size of flow tube
10 х 14 mm
Pool volume
Minimum pool volume
1 m3
Maximum pool volume (private)
50 m3
Environment
Ambient air temperature
+5÷35 С˚
Ambient air humidity
0.75
Filtration
Maximum load current for each filter unit pump
10A (2.2kW)
Number of filtration pumps to be connected
2 units
Heating
Maximum load current for connection of heating actuators
2A (0.4kW)
Water refill
Maximum load current for connection of the water refilling actuator
2A (0.4kW)
Connection type of level sensors
Float (reed switch)
Adjusting the averaging duration
1 – 60 sec
Adjusting the duration of water refilling
1 – 90 min
Adjusting the pause duration
1 – 10 h
Remote access
Wi-Fi
IEEE 802.11 b/g/n-compliant
Wi-Fi network frequency range
2.4 GHz
Bluetooth LE
Bluetooth 5
Ionization
Number of KOMBI MINI Ag/Cu electrode blocks
1 units
Подсоединение блока электродов
ВР 2"
Number of copper plates "MINI Cu"
9 units
Maximum pressure in the electrode blocks
2 bar
Minimum stabilized ionization current Cu
0,1 А
Maximum stabilized ionization current Cu
2,5 А
Minimum stabilized ionization current Cu/Ag
0,1 А
Maximum stabilized Cu/Ag ionization current
0,5 А
Filter cleaning
Type 6 position valve
Top / Side
For 6 position valves with connection
ВР 1 1/2" / ВР 2"
Number of controllable positions of the 6-position valve
6
Pressure setting range
0,5 – 2,0 bar
Compaction cycle time
10 – 120 sec