AUTOCLEAN S-LIGHT 1 1/2"-2"
In Stock
1 098 $
Automatic 6-position reverse flush block for 6-position clamps from 1 1/2" to 2".
Compatible with most known brands of 6-position clamps.
Automatic control of the 6-position sand filter clamp (automated reverse flush) is performed:
- At a set interval (the setting of the periodic automatic reverse flush filter is done using a variable potentiometer. From 1 to 168 hours)
- When the pressure in the filter exceeds a set value (pressure sensor is available separately)
- By an external control signal
The block controls 4 out of the 6 positions (excluding drainage and recirculation).
Coordination of operation with external devices (ball valve actuators, dosing systems, control panels, etc.) is carried out through "dry" contacts. It generates output signals - "emergency", "reverse flush process".
A power "dry" contact group is provided for the filtration pump switching during the change of position. During the change of position, the block interrupts the operation of the filtration pump.
RS-485 interface for coordination with external devices (AUTOCLEAN Light, DOMINATOR, AM Digital SOFT, AT Digital SOFT, SmartPoolBox).
The ability to connect to a power supply source to prevent unauthorized water leaks during pool changes, when power is off.
For additional control and management, "dry" non-potential contact groups are provided.
AUTOCLEAN S-LIGHT 1 1/2" - 2" PACKAGE CONTAINS:
- Control panel Autoclean S-Light 1 1/2" - 2" - 1pc;
- Adapter for AUTOCLEAN 1 1/2" -2" (set) - 1pc;
- Instruction - 1pc;
- Warranty label - 1pc.
Electrical parameters
Power supply voltage
220V ± 10%
Power frequency
50Hz
Protection class against electric shock
Class I
Maximum power consumption, not including connected load
20 W
Backwash cycle time
1 – 10 min
Protection class
IP56
Dimensions and weight
Dimensions of the control panel
193 х 275 х 140 mm
Weight of the control panel
1.6 kg
Measurement
Water temperature measuring range
0 – 52 С°
Environment
Ambient air temperature
+5÷35 С˚
Ambient air humidity
0.75
Filtration
Maximum load current for each filter unit pump
10A (2.2kW)
Number of filtration pumps to be connected
2 units
Heating
Maximum load current for connection of heating actuators
2A (0.4kW)
Filter cleaning
Type 6 position valve
Top / Side
For 6 position valves with connection
ВР 1 1/2" / ВР 2"
Number of controllable positions of the 6-position valve
6
Pressure setting range
0,5 – 2,0 bar
Compaction cycle time
10 – 120 sec