AUTOCLEAN COMBO
In Stock
3 220 $
Multifunctional dosing station for controlling and maintaining pH (hydrogen ion concentration) and Rx (oxygen-dissolving potential) of swimming pool water.
Suitable for private swimming pools of volume from 1 to 250 cubic meters.
Compatible with most known 6-position clamp valves.
FUNCTIONS:
- Dosing and control;
- Automatic 6-position reverse flush;
- Pool filtration control;
- Pool heating control;
- Water level control of swimming pool;
- Built-in remote access via Bluetooth and Wi-Fi.
DOSING AND CONTROL:
High-precision adaptive logic dosing algorithm for any type of chemical dosing in swimming pool water allows achieving the best parameters, maintaining the required concentration with maximum precision.
Two gaseous separators allow significant increase in measurement accuracy of pH and Rx, and subsequently the control of chemical reagents dosing.
Sensor state control of pH and Rx. The station analyzes the readings from the sensor electrodes each dosing cycle and sends a notification in case of no response to dosing, requiring sensor check and calibration.
Two silenced peristaltic pumps with a performance of 2.2 L/hr (optional 1.5 L/hr) allow dosing of any type of chemical for swimming pools. The second dosing pump can be set for any type of chemical dosing (default: 1 - pH, 2 - Cl).
The ability to connect an additional externally controlled dosing pump with a performance of 2.2 L/hr or 1.5 L/hr for dosing any type of chemical.
The ability to connect an unlimited number of duplicating dosing pumps with a performance up to 2.2 L/hr.
Exclusion of simultaneous dosing of reagents Cl and pH-, as their mixing leads to the formation of toxic chlorine in gas form.
Built-in overdose protection - a regulated maximum allowable daily dosage limit for the chemical dosage required to achieve the desired concentration in the pool water. The daily dosage limit is set for each type of chemical. When the upper limit is reached, the station stops dosing until the end of the day, in case of no response from the sensor, the station switches to a uniform daily dosing until the measuring sensor is recalibrated, thereby excluding the immediate consumption of the daily limit.
The ability to connect a chemical level sensor in the tank. The chemical level sensor prevents water from backflowing in the dosing line, thereby preventing chlorine crystallization. The pump stops when the chemical level in the tank reaches the set level (AQUA CATCH node).
Flow control. The station includes a flow meter.
Dosing, measurement, and event logs. The station maintains logs of chemical reagent usage, pH, Rx, and temperature, as well as event logs, which records emergency situations and daily report on dosing for each type of chemical.
AUTOMATIC 6-POSITION REVERSE FLUSH:
The block is installed in place of the handle on the 6-position filter clamp valve and automatically switches positions according to the schedule and flushing settings.
In the station settings, the following parameters are set:
- Duration of flushing, tightening, draining, and pause;
- Flushing cycles. A weekly schedule with the option to set up to two flushes a day;
- Selection of the operation mode of the filtration pump for the duration of the flush;
- Maximum pressure value at which a forced reverse flush is performed (pressure sensor is available separately).
The ability to control additional reverse flush of the filter AUTOCLEAN S-Light.
FILTRATION CONTROL:
Start and stop of two filtration installations with a power of up to 2.2 kW, 220V, each.
In the settings, the following modes of load are set:
- Small - 3 hours of operation, 5 hours of pause;
- Medium - 5 hours of operation, 3 hours of pause;
- Large - 7 hours of operation, 1 hour of pause;
- Public - 24-hour operation mode;
Automatic setting of the current consumption of the filtration pump, carried out using the pump calibration in the control panel.
Built-in overload and 'dry run' protection for the current consumption of the pumps guarantee long-life and reliable operation of the pumps.
The station has 3 timeout settings for the pump restart in case of an emergency situation.
POOL HEATING CONTROL:
Using a temperature sensor, the temperature of the swimming pool water is measured and the operation of the heat exchanger devices (circulating pump heating, electromagnetic valve, electromagnetic contactor for the heater) is controlled accordingly.
WATER LEVEL CONTROL:
Using two submersible, conductometric, or plunging level sensors, the station maintains the desired water level in the swimming pool by controlling the electromagnetic valve.
Wide range of settings:
- Regulation of averaging: from 1 to 60 seconds;
- Regulation of the duration of the fill: from 1 to 90 minutes;
- Duration of the pause between fillings: from 1 to 10 hours.
Allows using the system for different types of water level oscillations (waves).
Adaptation of the fill for less-performing wells and boreholes.
INTERFACE:
A matrix display with an intuitive interface in both Russian and English. 6 control buttons allow for easy navigation through the station's menu.
Built-in Wi-Fi and Bluetooth modules. Remote control is carried out through mobile applications ACON WEB CONTROL and ACON Bluetooth CONTROL.
Access to the application is divided into 3 levels:
- Work. User section with the ability to monitor values and changes, the range of which is set in the service section. It also includes the ability to change the pool loading mode.
- Settings. Service section for maintenance staff with the ability to track statistics and change filtration, reverse flush, and fill modes.
- Service. Service section with the ability to change all station dosing functions via Bluetooth. In the WEB version, some functionalities are not available because certain settings such as sensor calibration or changing dosing pump assignments require physical presence at the site.
By default, passwords are set for the settings and service sections. This level of division allows access according to the competence of the staff or user.
Notifications via E-mail. The station forms the message and sends it to the specified email addresses in the settings. This feature allows for immediate response to issues in the swimming pool, thereby preventing potentially dangerous situations from becoming critical. You can set up to 3 email addresses to receive emails in the settings.
RS-485 interface for connection to "Smart home" systems.
The ability to connect to a power supply source to prevent unauthorized water leaks during pool changes, when power is off.
AUTOCLEAN COMBO PACKAGE CONTAINS:
- Control panel AUTOCLEAN COMBO - 1pc;
- Peristaltic pump ACON PRM-2 2.2 L/hr - 2pc;
- Dosing pump set (suction and discharge with valves) ACON - 2pc:
- Soft PVC tube 4x6mm (2m) - 2pc;
- Discharge valve elongated 1/2"NPT ACON - 1pc;
- Chemical reagent catch valve 1/2"NPT ACON - 1pc.
- pH sensor-electrode Ø12mm with cable 2m - 1pc;
- Rx sensor-electrode Ø12mm with cable 2m - 1pc;
- Set of buffer calibration solutions - 1pc:
- pH 7 - 1pc;
- pH 9 - 1pc;
- Rx 650 - 1pc.
- Soft PVC tube 10x14mm (5m) - 1pc;
- Sampling cell assembly (temperature sensor, 2 electrode holders, 2 fitting) - 1pc;
- Sealing sleeve PVC 1/2"WR-D50/63 - 4pc;
- PVC round valve 1/2"WR-1/2"NPT - 2pc;
- Fitting 1/2"NPT-tube D14mm - 2pc;
- Pooltester chem. test kit (0.1-3.0mg/L and 6.8-8.2 units pH) - 1pc;
- Adapter for AUTOCLEAN 1 1/2"-2" (set) - 1pc;
- PVC-PVC wire 3x0.75 - 1pc;
- Fastener set - 1pc:
- Dubel 6*40 - 7pc;
- Screw 4.0*35 - 4pc;
- Screw 4.0*70 - 3pc.
- Instruction - 1pc;
- Warranty label - 1pc.
Electrical parameters
Power supply voltage
220В ± 10%
Power frequency
50Hz
Protection class against electric shock
Class I
Maximum power consumption, not including connected load
25 W
Backwash cycle time
1 – 10 min
Protection class
IP56
Dimensions and weight
Dimensions of the control panel
194 x 275 x 140 mm
Weight of the control panel
1.8 kg
Dosing
Number of metering pumps
2 units
Dosing pump type
Peristaltic
Maximum capacity of the peristaltic metering pump, at a back pressure of 0.7 bar
1.5 or 2.2 l/h
Maximum back pressure for peristaltic metering pump
1,3 bar
Peristaltic metering pump tube material
Santoprene
Suction and pressure tube material
SOFT PVC
Suction and pressure tube size
4 х 6 mm
Maximum suction tube length of the metering pump
2 m
Maximum dispense pump discharge tube length
2 m
Maximum pumped liquid temperature
+40 С°
Possibility to connect additional metering pumps
1 pieces
Operating back pressure for peristaltic metering pumps
0,7 bar
Measurement
Maximum pressure in the sample cell
2 bar
Hydrogen pH measurement range
0,0 – 9,9 units
Measuring range (ORP) Rx
000 – 999 mV
Water temperature measuring range
0 – 52 С°
Flow tube material
SOFT PVC
Size of flow tube
10 х 14 mm
Pool volume
Minimum pool volume
1 m3
Maximum pool volume (private)
250 m3
Environment
Ambient air temperature
+5÷35 С˚
Ambient air humidity
0.75
Filtration
Maximum load current for each filter unit pump
10А (2,2kW)
Number of filtration pumps to be connected
2 pieces
Heating
Maximum load current for connection of heating actuators
2А (0,4kW)
Water refill
Maximum load current for connection of the water refilling actuator
2А (0,4kW)
Connection type of level sensors
Float (reed switch)
Adjusting the averaging duration
1 – 60 sec
Adjusting the duration of water refilling
1 – 90 min
Adjusting the pause duration
1 – 10 h
Remote access
Wi-Fi
IEEE 802.11 b/g/n-compliant
Wi-Fi network frequency range
2,4 GHz
Bluetooth LE
Bluetooth 5
Filter cleaning
Type 6 position valve
Top / Side
For 6 position valves with connection
ВР 1 1/2" / ВР 2"
Number of controllable positions of the 6-position valve
6
Pressure setting range
0,5 – 2,0 bar
Compaction cycle time
10 – 120 sec