Automation of filter backwashing

By automating the backwashing process, pool owners and maintenance personnel can avoid the risk of "human error" that can potentially damage the filter and shorten its life.

With an automated backwash system, the filter is always in working order, ensuring that the pool remains crystal clear and safe for swimming.

Automation also increases the overall reliability of the pool filtration system, as the flushing is scheduled and the AUTOCLEAN series also features a forced backwash when the filter pressure is exceeded. This reduces the risk of equipment failure and extends the life of the filter.

All in all, automating the backwashing process of pool filters is a smart investment that gives you the confidence that your filtration system is running smoothly and efficiently.

AUTOCLEAN S-Light

• Control of 4 positions of the 6-position sand filter valve (except drain and recirculation)
• On valves 1 ½" to 4" (depending on modification)

Automation of filter backwashing is done:

• According to the set interval (setting the frequency of automatic backwashing of the filter is done by a variable potentiometer from 24 to 168 hours).
• By exceeding the pressure in the filter (pressure sensor is available separately).
• By external control signal.

AUTOCLEAN Light

• Control of all positions of the 6-position sand filter valve.
• Control of one or two pumps of the filter unit.
• Control of water heating.
• On valves 1 ½" to 4" (depending on modification)

Automation of filter backwashing is done:

• By set interval, the frequency of automatic filter backwashing is set in the device menu (up to twice a day).
• By excess pressure in the filter (pressure sensor is available separately).
• By external control signal.
• By calling the corresponding command from the device menu.

AUTOCLEAN COMBO

• Monoblock automatic filter backwash control system
• Control of one or two filter unit pumps
• Water heating control
• Water level control
• Chemical dosing station with two dosing pumps
• Built-in remote access via Bluetooth and Wi-Fi
• On 1 ½" to 2" valves

Automation of filter backwashing is done:

• By set interval, the frequency of automatic filter backwashing is set in the device menu (up to twice a day).
• By exceeding the pressure in the filter (pressure sensor is available separately).
• By calling the corresponding command from the device menu.